Turite klausimų? +370 698 34349 

Pro-Ject RPM 10 Carbon Patefonas su Cadenza RED Kartridžu galimi greičio variantai 33, 45 Aps/Min su elektroniniu greičio reguliavimu, diržinė pavara | Nemokamas Pristatymas

Būsena: Prekyboje

5 499,00 €

Nemokamas pristatymas per 0-3 darbo dienas.

Klauskite apie prekę / Siūlykite savo kainą / Derėkites

ŽEMIAUSIOS KAINOS GARANTIJA!

Mes pasiūlysim geresnę kainą ir duosime Jums papildomą nuolaidą iki 100 Eur! Tiesiog palikite užklausą arba paskambinkite mums.

Pro-Ject

Produkto aprašymas

Pro-Ject RPM 10 Carbon Patefonas su Cadenza RED Kartridžu galimi greičio variantai 33, 45 Aps/Min su elektroniniu greičio reguliavimu, diržinė pavara | Nemokamas Pristatymas

Itin aukštos klasės Patefonas su 10 Evo Tonearmu

RPM 10 Carbon: Beautiful and clever design with true high-end sound quality

Due to extensive research and development, we now lift our classic RPM design to an even higher level. The RPM 10 Carbon uses a new extra heavy chassis which features a special CNC machined MDF plate that incorporates hard resin coated steel pellets to form an extra heavy precise sandwich construction. A special complex heat treatment and a carbon surface coating ensures superior low resonance levels. The mass-loaded chassis is effectively decoupled from its surface via the included Ground it Carbon and its magnetic feet. Combined with a new special polished aluminium platter with internal TPE damping and a vinyl layer on top, the inverted ceramic main bearing delivers an absolute stable turntable speed with extra low rumble. The extra heavy outboard motor unit is equipped with a precise motor control and features a built-in switch between 33 & 45 rpm. Last but not least the non-compromise 10“ Evo tonearm with conical carbon-fibre armtube and inverted bearing design ensures perfect tracking, even with demanding cartridges. Highly flexible top-grade copper internal wiring. Delivered with topgrade 5P phono cable „Connect it CC“ with RCA plugs (XLR as an option).

Magnetically supported feet on Ground it Carbon

With two magnets located in the feet, the turntable is practically floating. The studs in the feet are only used for keeping them centered. Due to this unique feature the turntable is perfectly decoupled from the surface it is placed on.

Savybės

  • Advanced sandwich construction of plinth with combination of MDF, carbon fibre and steel pellets
  • Plinth manufactured with thermo treatment
  • Mass loaded subchassis design with magnetic feet
  • Inverted main bearing with ceramic ball/plate
  • 7,2kg acoustically inert aluminium platter with TPE damping and vinyl mat on the top
  • DC power supply with AC motor
  • Precise DC driven AC generator (Speed Box) built-in
  • Electronic speed control with 33/45 rpm switching
  • Outboard motor construction with massive steel base
  • Pre-mounted 10“ tonearm 10 cc Evolution
  • 5P Connect it Phono CC cable with RCA plugs (XLR available as an option)

Cadenza RED Kartridžas

Specifikacijos

  • Output voltage at 1 kHz 5 cm/sec - 0,45 mV
  • Channel balance - < 1,5 dB
  • Channel separation at 1 kHz - > 23 dB
  • Channel separation at 15 kHz - > 15 dB
  • Frequency range at -3 dB - 20 Hz - 50 kHz
  • Frequency response 20 Hz - 20 kHz - +3/-1
  • Tracking ability at 315 Hz at recommended tracking force *) - 80 μm
  • Compliance, dynamic, lateral - 12 μm/mN
  • Stylus type - Nude Fine Line on Alu cantilever
  • Stylus tip radius - r/R 8/40
  • Tracking force range - 2,2-2,7 g (22-27 mN)
  • Tracking force recommended - 2,5 g (25 mN)
  • *) Typical value


Parašyti savo apžvalgą

Jūsų apžvalgos: Pro-Ject RPM 10 Carbon Patefonas su Cadenza RED Kartridžu galimi greičio variantai 33, 45 Aps/Min su elektroniniu greičio reguliavimu, diržinė pavara | Nemokamas Pristatymas

Kaip įvertintumėte šią prekę? *

  1 balas 2 balai 3 balai 4 balai 5 balai
Kokybė