Turite klausimų? +370 698 34349 

HELIX AAC.3 Konverteris Max garsiakalbio įėjimo lygis 16 V (= 65 W / 4 Omai) dažnių juosta 18 Hz - 80,000 Hz | Nemokamas Pristatymas

Būsena: Prekyboje

69,00 €

Nemokamas pristatymas per 0-3 darbo dienas.

Klauskite apie prekę / Siūlykite savo kainą / Derėkites

ŽEMIAUSIOS KAINOS GARANTIJA!

Mes pasiūlysim geresnę kainą ir duosime Jums papildomą nuolaidą iki 100 Eur! Tiesiog palikite užklausą arba paskambinkite mums.

Helix

Produkto aprašymas

HELIX AAC.3 Konverteris Max garsiakalbio įėjimo lygis 16 V (= 65 W / 4 Omai) dažnių juosta 18 Hz - 80,000 Hz | Nemokamas Pristatymas

Automobilio Hi-Fi komponentų integravimas į esamas OEM garso sistemas tampa vis sudėtingesnis, nes šiandienos gamyklinės audiomagnetolos yra su pirminio stiprintuvo išėjimų trūkumu. Štai kur padeda naujas Helix AAC.3.

The smartest high-low converter in its class
Forget about error messages or loss of features (e.g. the fader) - the integrated ADEP.3 circuit cleverly "bypasses" the speaker diagnosis in factory car radios. Distorted sounds and increased THD which may occur with conventional high-low converters are prevented as well. The good thing is that the ADEP.3 doesn't load the car radio's amp unnecessarily and therefore reduces its current draw by up to 70 %.

Smart signal detection
Its “Double Activation Circuit” generates a +12 V remote signal for turning on connected power amplifiers in two different manners. Either it detects the DC offset on the speaker outputs of the OE car radio or it utilizes an integrated, switchable signal detection with variable sensitivity.
Furthermore the AAC.3 incorporates Audiotec Fischers proprietary "Power Save Mode", which turns off the remote output if no music signal is present for more than 2 minutes. That's really a great advantage as many cars with "CAN" or similar bus architectures keep the radio invisibly "alive" for up to 45 min. even if you have already left the car meanwhile.

High Resolution-ready
The AAC.3 generates a high-quality preamplifier signal out of the speaker output signal of a factory radio or amplifier and thus allows the easy connection of additional power amplifiers. Its wide frequency response of 18 Hz up to 80,000 Hz warrants excellent sound quality and makes this high-low converter ready for High-Res audio reproduction.

ADEP-3 High-Res-Audio PSM Start-Stop-Capability SMD Made-in-Germany

SAVYBĖS

  • Allows a simple connection of additional amplifiers to your factory sound system
  • Suitable for all car radios – even those with factory-installed amps
  • “ADEP.3 circuit” for bypassing radio diagnostic systems
  • Microcontroller-controlled monitoring of the music signal and generation of the remote signal
  • “Power Save Mode” – significantly reduces the power consumption of connected amplifiers when no input signal is present (after 2 min.)
  • “Double Activation Circuit” – generates a +12 V remote signal in two different ways to turn on connected amplifiers
  • Excellent sound quality thanks to very wide frequency response (18 Hz - 80 kHz)
  • High-quality, sealed and gold plated RCA / Cinch connectors for lossless signal transmission

SPECIFIKACIJOS

Max. speaker input level 16 Volts (= 65 Watts / 4 Ohms)
Input impedance 13 Ohms
Max. output level 4.0 Volts
Frequency response 18 Hz - 80,000 Hz
Max. current for remote output 200 mA
Operating voltage 7 - 18 Volts
Dimensions (H x W x D) 77 x 37 x 20 mm /
3.03 x 1.46 x 0.79"

PAKUOTĖJE

1 x Signal converter AAC.3

Parašyti savo apžvalgą

Jūsų apžvalgos: HELIX AAC.3 Konverteris Max garsiakalbio įėjimo lygis 16 V (= 65 W / 4 Omai) dažnių juosta 18 Hz - 80,000 Hz | Nemokamas Pristatymas

Kaip įvertintumėte šią prekę? *

  1 balas 2 balai 3 balai 4 balai 5 balai
Kokybė