Jūsų krepšelis tuščias.
Produkto aprašymas
Audison APK 165, automobilinė garsiakalbių sistema galia: 300W (4 omai), dažnių juosta: 60 ÷ 20k Hz, jautrumas: 93.5 dB | Nemokamas Pristatymas
Automobilinė, 2-jų juostų garsiakalbių sistema skirta užtikrinti kokybišką skambesį Jūsų automobilyje!
Two way system features AP 1 tweeter and AP 6.5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.
To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.
SPECIFIKACIJOS
| Comp | 2 way System |
| Size | 165 mm (6.5″) Woofer 26 mm (1″) Tweeter 46,5 x 37,5 x 20,1 mm (1.83″ x 1.47 x 0.8) Crossover |
| Power Handling | 100 W Continuous Power 300 W Peak Power |
| Impedance | 4 Ω |
| Frequency Response | 60 – 20k Hz |
| Sensitivity | 93,5 dB/Spl |
GALIMYBĖS
- AP 1 tweeter with 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.
- AP 1 tweeter with an acoustic lens designed to compensate for and fine-tune the in-car frequency response anomalies in the 10kHz – 13kHz bandwidth caused by restrictive OEM grilles in critical OEM placements.
- APCX TW very compact tweeter passive crossover optimized for OEM Integration featuring an attenuation switch (0 dB, +2dB) to tune the in-car response according to different installation conditions.
- Passive crossovers are supplied with fast-on connectors that conform to OEM integration. The ends, different in each of the two poles, eliminate any possible connection errors and speed up the
required installation time. - AP 6.5 woofer with 32 mm pure copper voice coil, for high power handling and outstanding low-frequency control.
- AP 6.5 woofer with a water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel Scan Vibrometer.
- AP 6.5 woofer with reduced mounting depth, providing ease of installation in OEM placements.
- AP 6.5 woofer with TPU (thermoplastic polyurethane) edge, featuring the unique “triple wave” profile for maximum linearity of excursion.
- AP 6.5 woofer with compact basket, protected by abrasion-resistant and scratch-proof coating, the motor affixed with damping epoxy adhesive.
- AP 6.5 woofer with a high current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature-resistant plastic cover, protecting it against accidental short circuits.
- Developed with the KLIPPEL suite.
Technical Specs LF
Woofer Size
165 mm (6.5 in)
Impedance
4 Ohm
Power Handling - Peak
300 W
Power Handling - Continuous
100 W
Frequency Response
60 ÷ 20k
Voice Coil Diameter
32 mm (1.26 in)
Magnet Size
85 x 40 x 15
Crossover Level Adjustment
+2; 0
Technical Specs HF
Tweeter Size
26 mm (1 in)
Voice Coil Diameter
20 mm (1.26 in)
Electric-acoustic Specs LF
Re
3.1 Ohm
Fs
80 Hz
Mms
12 g
Cms
0.31
BL
4.7
Qms
4.7
Qts
0.7
Vas
7.6 l
Le
0.23 mH
Spl
93.5 dB
Xmax
2.5 mm (0.1 in)
Kit Tech Data
Crossover Hi-Pass
HP @ 3,5 kHz - 6 dB Oct
Cone Diameter
129 mm
General
Weight Woofer
0.78 kg
Weight Tweeter
0.04 kg
