Produkto aprašymas
HELIX IK E10.1-DVC2 MK2 - kompaktiška automobilinė žemų dažnių kolonėlė su 250 mm (10″) garsiakalbiu ir 300 W RMS galia. „Bass Reflex“ korpusas ir „Downfire“ konstrukcija padeda atkurti gilius žemuosius dažnius, efektyviai paskirstyti garsą salone ir apsaugoti garsiakalbį nuo pažeidimų. Dviguba balso ritė leidžia pasirinkti 2 × 2 Ω, 1 × 4 Ω arba 1 × 1 Ω varžos konfigūraciją pagal naudojamą stiprintuvą. MK2 versija palaiko papildomai įsigyjamą „HELIX IMPACT“ (ISM) modulį, kuriuo kolonėlę galima paversti aktyvia sistema su integruotu stiprintuvu ir DSP procesoriumi. Patvaria kilimine danga dengtas korpusas ir kojelės su „Velcro“ juostomis užtikrina stabilų laikymąsi automobilio bagažinėje.
Pagrindinės savybės
250 mm (10″) garsiakalbis. Standi popieriaus pluošto membrana padeda tiksliai atkurti žemuosius dažnius.
300 W RMS galia. Galingam žemų dažnių atkūrimui.
„Downfire“ konstrukcija. Žemyn nukreiptas garsiakalbis išnaudoja garso atspindžius nuo automobilio grindų ir yra apsaugotas nuo mechaninių pažeidimų.
„Bass Reflex“ korpusas. Padeda išgauti didelį garso slėgį iš kompaktiškos kolonėlės.
Reguliuojama varža. Galima pasirinkti 2 × 2 Ω, 1 × 4 Ω arba 1 × 1 Ω konfigūraciją pagal naudojamą stiprintuvą.
ISM modulio palaikymas. Galimybė papildomai sumontuoti „HELIX IMPACT“ modulį su integruotu stiprintuvu ir DSP procesoriumi.
Nuimama jungtis. Varžtiniai kontaktai ir MOLEX jungtis leidžia patogiai prijungti bei atjungti kolonėlę.
Patvarus korpusas. Kiliminė danga su HELIX logotipu ir kojelės su „Velcro“ juostomis užtikrina stabilesnį laikymąsi bagažinėje.
HELIX IK E10.1-DVC2 MK2
Powerful bass, compact format – the performance subwoofer for everyday use
The HELIX IK E10.1 MK2 delivers deep, punchy bass in a space-saving design – ideal for those who want rich low-frequency performance without the bulk of a conventional subwoofer enclosure. New in the MK2 version: The IK E10.1-DVC2 is now ISM-ready and can be easily upgraded to an active subwoofer solution via a replaceable connection terminal, if required.
Smart downfire design
The intelligent downfire construction ensures optimal bass dispersion in the vehicle. It uses the vehicle floor as an acoustic reflection surface to intensify low-frequency output, offers optimum protection for the speaker, and allows for a lower-profile design. Combined with bass-reflex technology and a powerful 250 mm chassis, it provides a dynamic bass experience with impressive sound pressure while making efficient use of available space.
High-grade components for sonic strength
The IK E10.1-DVC2 MK2 features the 250 mm IK W10-DVC2 chassis. Its extremely stiff cone made of hand-scooped paper fibers combined with the heavy-duty driver system converts amplifier power easily and without compression effects into loads of sound pressure – while also scores sonically with subtle beats.
Smart terminal concept
The new connection terminal features a plug-in design and offers two connection options: a screw terminal for conventional speaker cables as well as a standardized MOLEX connector for custom wiring harnesses. This combines the best of two worlds: maximum flexibility for classic HELIX-style installations, plus a plug & play logic familiar from the MATCH ecosystem. It greatly simplifies installation and enables quick, safe removal and reinstallation when extra space is needed. The detachable plug also reliably protects against short circuits, as no bare cable ends remain inside the vehicle.
Flexible connectivity
Thanks to its dual voice coil design, the IK E10.1-DVC2 MK2 offers a high degree of flexibility when choosing the right amplifier setup. Depending on the application, the voice coils can be configured as 1 x 1 Ω (ideal for HELIX and MATCH monoblocks), 1 x 4 Ω (e.g. for bridged channels on powerful multi-channel amplifiers such as the HELIX AMPLIFY series) or 2 x 2 Ω (for parallel operation with multichannel-multitools, for example from the HELIX NEXT and MATCH UPGRADE lines) – making virtually any low-bass configuration easy to realize.
ISM-ready – optional active subwoofer upgrade
In the MK2 version, the IK E10.1-DVC2 is now ISM-ready: By replacing the passive terminal with the optional IMPACT Subwoofer Module (e.g. ISM 400.2DSP), the enclosure subwoofer can be upgraded to an active subwoofer in no time. As a direct-fit solution, the ISM 400.2DSP is a powerful amplified subwoofer module with integrated signal processor – developed for high-quality subwoofer upgrades in modern vehicles with factory-installed sound systems. This results in a compact all-in-one solution combining amplification and DSP signal processing for powerful yet controlled bass – without having to rebuild the existing system.
Rugged, practical, and easy to install
The enclosure is covered with a sturdy carpet featuring the embroidered HELIX logo, making it not only visually appealing but also robust enough for everyday use. The feet, equipped with Velcro tape, provide a secure and stable stand within the vehicle.
Features
Downfire enclosure for ideal bass dispersion in the vehicle and perfect protection of the speaker
Compact ported enclosure design ensures high sound pressures and allows space-saving integration in the vehicle
Equipped with one powerful 250 mm / 10” subwoofer with hand-scooped paper cone for rich, deep bass
Voice coil impedance configurable via connection terminal allows flexible system configuration – 2 x 2 Ohms, 1 x 4 Ohms or 1 x 1 Ohm
Active subwoofer option – can be converted into an active subwoofer by replacing the terminal with an IMPACT Subwoofer Module (ISM)
Connection terminal with pluggable screw and additional Molex connector for use with conventional speaker cables or custom wiring harnesses – allows quick and secure installation and removal
Feet with Velcro tape for a secure stand in the vehicle
Sturdy carpet surface with embroidered HELIX logo
Techniniai duomenys
IK E10.1-DVC2 MK2 – 2 x 2 Ohms
Power handling RMS P 300 Watts
Recommended amplifier power RMS 150 - 300 Watts
Impedance z 2 x 2 Ω / 1 x 4 Ω / 1 x 1 Ω
Max. linear excursion Xlin +/- 8 mm
Max. mechanical excursion Xmax +/- 18.5 mm
Port tuning frequency Fb 43 Hz
Sensitivity
SPL
91 dB @ 2.83V / 1m
88 dB @ 1W / 1m
Dimensions (H x W x D)
187 x 471 x 375 mm
7.4 x 18.5 x 14.8"
Integrated subwoofer chassis HELIX IK W10-DVC2
Recommended DSP settings "Self-define" highpass 37 Hz / Q = 1.5;
EQ filter: 115 Hz / Q = 0.7 / -2 dB
Compatibility
IMPACT Subwoofer Module:
HELIX IMPACT ISM 400.2DSP
Scope of delivery
1 x Downfire enclosure subwoofer IK E10.1-DVC2 MK2
1 x Data sheet













































































