Jūsų krepšelis tuščias.
Produkto aprašymas
HERTZ CK 165 2-krypčių garso sistema jautrumas 93 dB SPL varža 4Ω dažnių juosta 55 ÷ 22,5kHz | Nemokamas Pristatymas
Specifikacijos
- Power Handling - Peak 285W
- Power Handling - Continuous 95W
- Impedance 4Ω
- Frequency response 55 ÷ 22,5kHz
- Sensitivity 93 dB SPL
- Voice coil Ø mm (in.) 25 (1)
- Woofer size mm (in.) 165 (6.5)
- Tweeter size mm (in.) 26 (1.14)
- Woofer magnet High density flux ferrite
- Tweeter magnet Neodymium
- Woofer cone Pressed-paper-mica cone
- Tweeter dome Tetolon
- Crossover type 2 Way Passive Crossover
- Crossover cut off 2,5 kHz @ 12 dB Oct.
Išmatavimai
Motavimi gylis 62,5mm
Montavimo diametras 142mm
| A | 165 mm | |
| B | 142 mm | |
| C | 71 mm | |
| D | 62,5 mm | |
| E | 171 mm | |
| F | 24 mm |
Frequency response
Features
C 26:
1. Soft Tetolon® fiber 26 mm (1 in.) dome and 20 mm (0.8 in.) voice coil, for a natural and yet detailed reproduction of musical nuances.
2. Neodymium magnet with high-density magnetic flux, optimized for maximum control during high-energy dynamic transients in the mid-high frequency range.
3. Faceplate geometry optimized with FEM (Finite Element Modeling) technique for a linear frequency response in off-axis installations.
4. Wide range of accessories, for easy integration in OEM placements.
C 165:
1. 165 mm (6.5 in.) semi-pressed paper cone SPP-M (Semi Pressed Paper- Mica) enhanced with Mica powder for an excellent balance between lightness and damping.
2. High-density flux ferrite magnet combined with low-carbon polar plates for reduced distortion at high power levels.
3. 25 mm (1 in.) voice coil featuring an aluminum former to guarantee high excursion and power handling.
4. Compact and transparent three-spoke basket acoustically combined with a rubber magnet cover for total damping of spurious vibrations.
5. Provided elegant grille made with high-resistance ABS plastic structure with a metallic finish combined with a protective metal mesh.
CCX 2:
1. Tweeter level adjustment through a three-position switch (0, +3 dB) for an optimal tone balance that can be customized by the user.
2. Low-loss factor capacitors and low resistance inductances made with pure copper, for maximum sound transparency and clear high frequencies.
3. Compact design with metallic finish for an easy installation, with air vents for efficient heat dissipation.
Technologies
SPP-M
SPP-M (Semi Pressed Paper-Mica) cone enhanced with Mica powder for an excellent balance between lightness and damping.
